Quality assurance period

  1. HOME
  2. Quality assurance period
  • Shelf Life of MARKTEC Products

  • Machinery products warranty standard

Shelf life of our products are classified as consumable goods. We lay down shelf life as follows but as rule it’s unopened. (Including aerosol products). We indicate date of manufacture as Lot. No. Please refer to another attachment for means of displaying about date of manufacture.

ProductsProducts
Super-Check (For Color Contrast Penetrant Testing) *note 1Three years
Eco-Check (For Color Contrast Penetrant Testing)Three years
Super-Glo (For Fluorescent Dye Penetrant Testing) *note 1Three years
Eco-Glo (For Fluorescent Dye Penetrant Testing)Two years
Super-Magna (For Magnetic Particle Testing) *note2Three years
Eco-Magna (For Magnetic Particle Testing) *note2Two years
Super-Clean (Degreasing Cleaner)Three years
Parts-Cleaner (Degreasing Cleaner)Three years
Super-MarkerpenThree years
Aotakesol(White,Blue、Remover)Two years
Super-Tracer (For Leak Inspection Materials)Two years
Super-Bubble (For Leak Inspection Materials)Two years
Leak-Check (For Leak Inspection Materials)Two years
Tecmarker, Eco-Color Remover (For marking machine)Three years
Tecmarker Paint/ Lubricant (For marking machine)Two years
Eco-Color Paint (For marking machine)Two years
Eco-Color Paint (For marking machine)One year


*note1: The shelf life of Super-Check / Super-Glo (water based type) is two years after manufacture.
*note2: The shelf life of Super-Magna conditioner (water based type) and Eco-magna conditioner EC-4, Antifoaming Agent 71A and Super-keep antirust AR-100K, AR-200K are one year after manufacture. Super Magna Fluorescent Magnetic Particle LY-10 SOL (water based type) is two years after manufacture. Super Magna White Magnetic Particle WD-55 and Super Magna Red Magnetic Particle RD-203 are five years after manufacture.
*note3: The shelf life is the period of storage time during which the material is determined to be fully functional. All products are stored under appropriate conditions and function correctly even after opening, if used according to the instructions.
*note4: The shelf life is a guideline for the time for which MARCTEC has determined product quality during storage. If you use a product that has passed the shelf life, please conduct the performance check and make a judgment by the customer.

Attachment; Date of Manufacture of MARKTEC Products

1)

Aerosols (Indicated in four digits on the bottom of can)

2)

Products except aerosols (Indicated in six digits on the label)

* Table for relevant Month and Alphabet

ABCDEF
JanuaryFebruaryMarchAprilMayJune
GHIJKL
JulyAugustSeptemberOctoberNovemberDecember

We would like to lay down the warranty periods below. Please note that we cannot assure the warranty periods in case of bad storage and wrong usage.

ProductsWarranty Period
Super-light series.
(Ultraviolet Light)
Ultraviolet Light /
Ultraviolet Intensity Tester
One year after our inspection date
Lamp / Glass filterOne year after our inspection date or 500 hours after using, whichever comes earlier.
LED light sourceOne year after delivery date (EXW) (Note 2)
Overhauled product (Note 1)Half year after delivery date (EXW)
Air filterNon
Printing Machine /
Marking Machine
Printing Machine/
Printing head/Marking gun
One year after delivery date (EXW) or 3 months after start using whichever comes earlier. (Note 4)
ControllerOne year after delivery date (EXW)
Pump unitOne year after delivery date (EXW)
Marking unitOne year after delivery date (EXW)
Overhauled product (Note 1)Half year after delivery date (EXW) or 2 months after start using whichever comes earlier (Note 4)
Spare parts
(Pump/Valve/Sensor etc.)
Half year after delivery date (EXW)
Printing head spare partsNon
Filter and other consumable partsNon
Eddy Current testerOne year after delivery date (EXW)
Tesla-MeterOne year after delivery date (EXW)
Customized Machine
(Printing, Marking, Non-destructive testing)
One year after commissioning date (Note 3)


Note 1) Warranty period of overhauled product is applied to overhauled part only.
Note 2) LED light source does not guarantee the irradiation time.
Note 3) We accede to each contract in case of we make special contract with customer and set up warranty period. Note 4) Nozzle stroke adjustment of printing head is required as needed.