Providing security and safety to society through quality assurance

Product Information

Non-Destructive Testing
- Search on Category
- Search on Theme
  - Recommended Flaw Detection Material
  - Recommended Testing System
Marking
- Search on Category
- Search on Theme
  - Recommended Paint Jet Printer System
  - Recommended Marking System

Non-Draining PT Unit MH-1

Features

・No drainage treatment facility is necessary. Special solvent remover is used for washing and
　reused after recovery
・Remarkable improvement of inspection capacity because of no drying process
・Post cleaning process is not needed
・Not applicable of Japanese Fire Prevention Law

Use

Treatment facility for drainage is not needed

Product Specification

Main Specification
Type	MH-1-A (Automatic)	MH-1-M (Semi-automatic)
Movement of work	Transfer / Up and Down : Fully automatic	Transfer : Manual Up and down : Automatic
Workpiece to be inspected	Dimension : Max. W600 x D600 x H200 mm Wight : Max. 30 Kg
Detection process	Penetrating : Immersion Washing : Steam washing and Immersion washing Drying : Volatilization (natural drying) Observation : Under UV light in inspection room
PT materials	Penetrant : Fluorescent penetrant RP-2000C Remover : Super Clean BP-3
Electric power	AC 200/220 V±10%, 50/60 Hz, 3-phase
Air source	More than 0.4 MPa, 0.5 Nm³/min
Cooling Water	Industrial water Pressure : More than 0.1 MPa Connection : Supply 15A/Discharge 25A
Electric power consumption	Normal 20 KVA
Tact time	Approx. 5 min.

Main Equipment
Penetrant bath	Volume approx. 180 L
Immersion washing bath	Volume approx. 240 L
Steam washing bath	Volume approx. 100 L
Inspection room	W1600 x D1500 x H2700 mm with blackout curtain
Refrigerant cooling equipment	W960 x D730 x H1440 mm, 12 Kw
UV light	Super-Light E-40-2 (400 W)
Basket	W600 x D600 x H200 mm (6 sets)