Providing security and safety to society through quality assurance

PRODUCT PRODUCT category image

Product Information

Non-Draining PT Unit MH-1

Non-Draining PT Unit MH-1


・No drainage treatment facility is necessary. Special solvent remover is used for washing and
 reused after recovery
・Remarkable improvement of inspection capacity because of no drying process
・Post cleaning process is not needed
・Not applicable of Japanese Fire Prevention Law


Treatment facility for drainage is not needed

Product Specification

Main Specification
Type MH-1-A (Automatic) MH-1-M (Semi-automatic) 
Movement of work Transfer / Up and Down : Fully automatic Transfer : Manual Up and down : Automatic 
Workpiece to be inspected Dimension : Max. W600 x D600 x H200 mm
Wight : Max. 30 Kg
Detection process Penetrating : Immersion
Washing : Steam washing and Immersion washing
Drying : Volatilization (natural drying)
Observation : Under UV light in inspection room
PT materials Penetrant : Fluorescent penetrant RP-2000C
Remover : Super Clean BP-3
Electric power AC 200/220 V±10%, 50/60 Hz, 3-phase
Air source More than 0.4 MPa, 0.5 Nm3/min
Cooling Water Industrial water
Pressure : More than 0.1 MPa
Connection : Supply 15A/Discharge 25A
Electric power consumption Normal 20 KVA
Tact time Approx. 5 min.

Main Equipment
Penetrant bath Volume approx. 180 L
Immersion washing bath Volume approx. 240 L
Steam washing bath Volume approx. 100 L
Inspection room W1600 x D1500 x H2700 mm with blackout curtain
Refrigerant cooling equipment W960 x D730 x H1440 mm, 12 Kw
UV light Super-Light E-40-2 (400 W)
Basket W600 x D600 x H200 mm (6 sets)

Detection Process


Inquiry about Products

Please send inquiry to us



Monday to Friday 9:00-18:00


Contact Us

Return to list


You will need Adobe Reader software installed on your computer to view the catalog.Adobe Reader is available FREE from Adobe.