Non-Draining PT Unit MH-1

Features

• No drainage treatment facility is necessary. Special solvent remover is used for washing and reused after recovery
• Remarkable improvement of inspection capacity because of no drying process
• Post cleaning process is not needed
• Not applicable of Japanese Fire Prevention Law

Main Specification
Type	MH-1-A (Automatic)	MH-1-M (Semi-automatic)
Movement of work	Transfer / Up and Down : Fully automatic	Transfer : Manual   Up and down : Automatic
Workpiece to be inspected	Dimension : Max. W600 x D600 x H200 mm Wight : Max. 30 Kg
Detection process	Penetrating : Immersion Washing : Steam washing and Immersion washing Drying : Volatilization (natural drying) Observation : Under UV light in inspection room
PT materials	Penetrant : Fluorescent penetrant RP-2000C Remover : Super Clean BP-3
Electric power	AC 200/220 V±10%, 50/60 Hz, 3-phase
Air source	More than 0.4 MPa, 0.5 Nm3/min
Cooling Water	Industrial water Pressure : More than 0.1 MPa Connection : Supply 15A / Discharge 25A
Electric power consumption	Normal 20 KVA
Tact time	approx. 5 min.

Main Equipment
Penetrant bath	Volume approx. 180 L
Immersion washing bath	Volume approx. 240 L
Steam washing bath	Volume approx. 100 L
Inspection room	W1600 x D1500 x H2700 mm with blackout curtain
Refrigerant cooling equipment	W960 x D730 x H1440 mm, 12 Kw
UV light	Super-Light E-40-2 (400 W)
Basket	W600 x D600 x H200 mm (6 sets)

Detection Process (Movie)

※ Click each process to view movie

• 
•