Hot Water Fluorescent PT Unit HW-1

Newly developed PT system using special penetrant (Patent pending) and hot water for washing penetrant.

Features

• High sensitivity
• Not applicable of Japanese Fire Prevention Law, PRTR and other environmental regulations
• Less load of drainage treatment facility because of low COD

• one half of installed space
• two times of inspection capacity
• one half of drainage volume

Main Specification
Workpiece to be inspected	Dimension : Max. W700 x D400 x H300 mm Wight : Max. 30 Kg
Detection process	Penetrating : Spraying Washing : Hot water Drying : Air blow Observation : Under UV light
Penetrant	Fluorescent penetrant EG-300
Electric power	AC 200/220 V±10%, 50/60 Hz, 3-phase
Air source	More than 0.4 MPa, 1.0 Nm3/min, connection 40A
Cooling Water	Industrial water Pressure : More than 0.1 MPa Connection : Supply 25A/Discharge 50A
Electric power consumption	Normal 50 KVA
Tact time	Approx. 2.5 min.

Main Equipment
Penetrant spray & Air blow	L1630 x W1000 x H1800 mm
Rough washing Finishing washing Drying	L1070 x W1000 x H1800 mm (each bath)
Transfer conveyor	L5200 x W1700 x H1800 mm
Penetrant supply unit	L400 x W400 x H400 mm (volume approx. 50 L)
Circulating water supply unit	L1200 x W600 x H410 mm (volume approx. 220 L)
Washing water supply unit	L500 x W500 x H800 mm (volume approx. 180 L)
High pressure blower	11 KW, 200 V, 3-phase
Inspection room	W1600 x D1500 x H2700 mm with blackout curtain
UV light	Super-Light E-40-2

Detection Process

• 
•