Heavy Plate Stamping System

This system is installed above the plate roller transfer table and stamps characters, symbols and special marks automatically at the designated position of surface of the plate, while the plate is stopped on the roller table, in accordance with the stamping data received from host computer.

Features

• Fully automatic stamping in accordance with the stamping data from host computer
• 5 pneumatic styluses are controlled independently and ensure high speed, high quality stamping. Stamping 50 characters in 11.5 seconds
• Numerals, alphabets, symbols and special marks can be stamped
• Stamping both longitudinal direction and transverse direction of plate by rotating the stamping head

Main Specification
Plate to be stamped	Heavy Plate
Stamping Condition	Dry, free of water, oil and mill scale Temperature : Max. 300 ℃ Waviness : minus 5-plus 50 mm/m Hardness : less than HRC 30
Installed Position	Above the plate roller transfer table in plate finishing plant
Stamping Specification	Stamping Type : Pneumatic stylus type Stamping Depth : 0.1-0.2 mm Character Size :  Alphabet, Numeral & Symbol 10 (H) x 7 (W) mm  Special Mark 10 (H) x 20 (W) mm No. of Characters : Max. 50 in one line Cycle Time: 11.5 sec. for 50 characters (including lowering and raising time of stamping head) Kind of Characters : Alphabet, numeral, symbol and special mark

Main Equipment
Stamping Machine	Stamping Head (5 heads), Stamping Head Case etc. Approx. 420W x 350H x 900L mm
Data Processing Panel	Sequencer (PLC), Data Distribution Device Approx. 1200 W x 2000 H x 600 D mm
Stamping Driver Panel	Approx. 600 W x 800 H x 300 D mm
Servo Driver Panel	Approx. 1200 W x 2000 H x 600 D mm
Main Operation Panel	Desk type Approx. 1000W x 850 D x 800 H mm
Frame and Drive Unit	Bridge type frame Drive unit for Stamping Machine  X-axis Transverse movement  Z-axis Upward and Downward movement  W-axis Rotating movement

Stamping Sample

Stamping Sample1	Stamping Sample2

 

• 
•