Pipe Marking System (Type-Ⅱ)

Features

• Fully automatic marking in accordance with the marking data from host computer
• Fast marking cycle and high productivity because of the marking during the pipe is running on the conveyor
• Fast response pencil guns spray clear, sharp and uniform dot marking
• Numerals, Alphabets, Symbols and special marks can be marked on full length of pipe
• Multi-line marking and parallel marking of several pipes can be done if multiple marking machines are installed

Main Specification
Pipe to be marked	Seamless pipe, ERW pipe
Outer Diameter	More than 27.0 mm
Pipe Condition	Dry, free of water, oil and mill scale Temperature : Normal temperature Bend : Less than 4/1000 mm for total length
Installed Position	Before cutting: Above the V-roller transfer conveyor After cutting: Above the chain transfer conveyor (Recommendation)
Marking Specification	Marking Type : Paint dot spray type Color : White Dot Configuration : 22-dot-matrix Dot Diameter, Pitch : 2.2 mm Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks
Marking Speed	Max. 90 m/min. (Max. 45 m/min. in case of high-density marking)
Paint/Remover	Paint : Ecocolor PSG (White) Remover : Ecocolor Remover G
Main Equipment
Mechanical Equipment	Marking Machine : Marking Head (22 dots), Marking Head Case, Nozzle Cleaning Device and others Approx. 300 W x 350 H x 350 L mm
	Pump Unit : Paint Pump, Remover Pump each 1 set Approx. 860 W x 1160 H x 800 D mm
	Frame and Drive Unit : Cantilever type frame Drive unit for Marking Machine:  Z-axis Upward and Downward movement Speed : 280 mm/sec.
Control Equipment	Control Panel, Power Distribution Panel, Driver Panel, Main Operation Panel, Local Operation Panel 1 set each

Typical Marking Pattern

1.Single end marking

2.Double end marking

3.Repeat marking

Marking Sample

Marking Sample1	Marking Sample2

• 
•