Heavy Plate Marking System (Type-Ⅱ)

Features

• Fully automatic marking in accordance with the marking data from host computer
• Fast response pencil guns spray clear, sharp and uniform dot marking at the plate transfer speed of 120 m/min.
• 36-dot-matrix dense special marks and fonts can be registered max. 999 kinds
• Fast marking cycle/High productivity because of the marking during the plate is running

Main Specification
Plate to be marked	Heavy Plate
Plate Condition	Dry, free of water, oil and mill scale Temperature : Max. 300 degrees C Waviness : minus 5-plus 50mm/m Top/Tail edge curve : Max. plus/minus 100 mm
Installed Position	Above the plate roller transfer table in Plate finishing plant Line speed : Max. 120 m/min
Marking Specification	Marking Type : Paint dot spray type Color : White Dot Configuration : 36 dots/head x 4 heads x 2 sets Dot Diameter, Pitch : 5 mm Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks
Paint/Remover	Paint : Tecmarker PMK (White) Remover : Tecmarker Remover PMK

Main Equipment
Marking Machine	Marking Head (36-dot x 4), Marking Head Case, Nozzle Cleaning Device and others Approx. 400 W x 350 H x1200 L mm x 2 sets
Pump Unit	Paint Unit : Approx. 860W x 1160H x 530D mm x 2 sets Remover Unit : ditto
Marking Control Panel	Print Controller (PC), Sequencer (PLC) Approx. 1600 W x 2000 H x 600 D mm
Marking Driver Panel	Approx. 1600 W x 2000 H x 600 D mm x 2 sets
Servo Driver Panel	Approx. 1200 W x 2000 H x 600 D mm
Main Operation Panel	Desk type Approx. 1200 W x 850 D x 800 H mm
Frame and Drive Unit	Bridge type frame Drive unit for Marking Machine:  X-axis Transverse movement  Z-axis Upward and Downward movement

Marking Movie

※ Click photograph to view movie

(12,193KB / 38sec.)

• 
•