Heavy Plate Marking System (Type-Ⅰ)

This system is installed above the plate roller transfer table and marks characters, symbols and special marks at the designated position of surface of the plate, while the plate is stopped on the roller table, in accordance with the marking data received from host computer.

Features

• Fully automatic marking in accordance with the marking data from host computer
• Fast response pencil guns spray clear, sharp and uniform dot marking
• 36-dot-matrix dense special marks and fonts can be registered max. 999 kinds
• Extremely precise marking can be done on stationary plate

Main Specification
Plate to be marked	Heavy Plate
Plate Condition	Dry, free of water, oil and mill scale Max. 300 ℃
Installed Position	Above the plate roller transfer table in Plate finishing plant
Marking Specification	Marking Type : Paint dot spray type Color : White Dot Configuration : 36-dot-matrix Dot Diameter, Pitch : 5 mm Kind of Character : Numerals, Alphabets, Symbols, Special fonts and marks
Paint/Remover	Paint : Tecmarker PMK (White) Remover : Tecmarker Remover PMK

Main Equipment
Marking Machine	Marking Head (36 dots), Marking Head Case, Nozzle Cleaning Device and others Approx. 300 W x 500 H x 400 L mm
Pump Unit	Paint Pump, Remover Pump each 1 set Approx. 860 W x 1160 H x 800 D mm
Marking Control Panel	Print Controller (PC), Sequencer (PLC) Approx. 1600 W x 2000 H x 600 D mm
Marking/Servo Driver Panel	Approx. 1200 W x 2000 H x 600 D mm
Main Operation Panel	Desk type Approx. 1000 W x 850 D x 800 H mm
Frame and Drive Unit	Bridge type frame Drive unit for Marking Machine:  X-axis Transverse movement  Y-axis Movement of plate longitudinal direction  Z-axis Upward and Downward movement  W-axis Rotating movement

Marking Sample

Marking Sample1	Marking Sample2

• 
•